The Following screen appears:
Pick "Yes" and this screen appears:
Depending on your modem you may need to pick your modem from a list rather than
having Windows NT detect it, Generally this is a "Standard 28.8K modem.
Once you have completed the above steps this screen appears to confirm that your
modem is installed properly.
Pick "OK" on this screen.
Then pick Network... from this menu.
Check off ONLY TCP/IP and click "OK"
Then click on Configure... and select the amount of security you wish to assign to your modem.
at a minimum you must have Dial out only
Click "Restart" to finish the configuration.
Go to "My Computer", "Dial-up Networking" and this screen is shown.
Have your screen match the following screen and press "Finish"
Now click each of the upper tabs and have each screen match the respective
Tab shown in the images below. Then click on TCP/IP Settings
This is very important this screen match EXACTLY as below
Fill out the next screen according to the graphic below
Input your providers DNS server numbers are
This is very important this screen match EXACTLY as below
This is very important this screen match EXACTLY as below
This is very important this screen match EXACTLY as below
Now click on More
and set your logon preferences in the dialing screen to your likings,
you should set the redial to 99 and the idle seconds to 0
Then click on "OK"
The next time you click on dial you will be shown the following screen. Fill it out as
shown below (changing the login name to yours)
BE SURE THAT THE "Domain" Field is
After you click on "OK" the computer will dial, and you will get a connected message, after this you are free to surf the net.